Is heating water for hundreds of guests simply a matter of having a large boiler? Gianmarco Marchetti, administrator of Marco Marchetti Hotéis, helps dispel this misconception by explaining that water heating is a system involving demand, storage, distribution, and maintenance, rather than a single piece of equipment.
In hotels and other accommodation facilities, hot water consumption is not constant throughout the day. It is concentrated in short periods, especially in the morning and early evening, when many guests take showers almost simultaneously. A system designed solely around average daily consumption fails precisely during these peak periods, resulting in lukewarm water and complaints at the front desk. For this reason, system sizing begins with the demand curve, which shows how much hot water is required each hour, and only then moves on to equipment selection.
Myth 1: The Bigger the Water Heater, the Better the Results
The straightforward answer is no. An oversized water heater operates in short cycles, frequently turning on and off, which accelerates wear and wastes energy unnecessarily. What matters is the relationship between heating capacity and the volume stored in hot water storage tanks, which hold previously heated water for periods of peak demand.
According to Gianmarco Marchetti, equipment selection should be based on the hotel’s actual usage patterns rather than a general rule of thumb applied to every building. In business hotels, for example, peak demand is usually concentrated in the early morning hours, while in leisure hotels, demand tends to be more evenly distributed. In such operations, the storage tank acts as a buffer between installed heating capacity and demand, and the right combination often costs less than simply purchasing a more powerful heating system.
Another factor influences the calculation: in buildings with high consumption, the energy source also plays a role in the decision. Gas, electricity, solar energy, and heat pumps have very different installation and operating costs, and the best choice depends on the building’s consumption profile and the local availability of each energy source.
Myth 2: Lukewarm Water Is Always the Water Heater’s Fault
When a guest complains that the water takes too long to heat up, it is natural to blame the water heater. In practice, however, the cause often lies in the piping system. In large buildings, hot water travels long distances before reaching the upper floors. If the system lacks recirculation, the water sitting in the pipes cools down and must be flushed out before hot water arrives. Recirculation is a system in which a pump keeps heated water moving through a loop, ensuring that it remains readily available near each point of use.
As Gianmarco Marchetti observes, the quality of pipe insulation and proper system balancing are just as important as the heating equipment itself. Uninsulated pipes lose heat along the way, while an unbalanced system delivers too much hot water to some rooms and too little to others. This type of failure may appear to be a heating problem when, in reality, it is a distribution issue.
There is also the issue of waste. Waiting for water to heat up means allowing already treated water to flow down the drain, increasing consumption costs. For hotels committed to the responsible use of resources, this can also affect their reputation among guests. When the system is properly sized and return piping keeps hot water circulating, waiting times decrease significantly, along with the volume of water wasted.
Myth 3: Does the System Take Care of Itself?
This may be the most expensive misconception of all. Large-scale water heating systems require regular maintenance. Limescale deposits reduce heat transfer efficiency in heating coils, which are internal tubes through which the water being heated flows. Safety valves need to be inspected, and temperature sensors lose accuracy over time. Those who neglect these tasks often discover the problem only when the system stops working, usually during peak season.
Maintenance also involves safety considerations. Water stored at low temperatures can encourage bacterial growth, while excessively hot water increases the risk of burns. Temperature control therefore protects guests from both extremes, and maintaining this balance requires properly calibrated equipment and clearly established inspection routines.
According to Gianmarco Marchetti, planned maintenance generally costs less than emergency repairs because it allows shutdowns to be scheduled during periods of low occupancy without taking guest rooms out of service. In hotels, this principle applies to any technical system, but water heating is among the most noticeable to guests, since a hot shower is a basic expectation of any hotel stay.
What Remains After the Myths Are Debunked?
Once these misconceptions are cleared up, the overall picture becomes easier to understand. Heating water on a large scale is an engineering challenge that combines demand, storage, distribution, and maintenance, with each component affecting the others. Replacing a water heater without examining the piping system, or increasing heating capacity without reassessing storage capacity, often addresses a symptom while leaving the underlying cause unresolved.
For hotel managers, it is worth asking how hot water circulates from beginning to end throughout the system and where heat or water is lost along the way before deciding which equipment to purchase. Answering these questions through a thorough technical assessment helps avoid unnecessary expenses, guides design decisions, and ensures guest comfort throughout the year.
